Hoppec Glue 3003

Technical Specifications

Appearance: Liquid

Color: Beige or Green

Density (Kg/m³): 1.7 – 1.8

Viscosity (at 25°C): 10,000 – 20,000 mPa.s

Pot-life (at 25°C): 20-30 minutes

Application and drying temperature: 10 – 40°C

Foot traffic allowance: After 6 hours

Full curing time: 2 days

Coverage rate: 1 – 1.5 kg/m² (depending on surface type and absorption)

Application & Installation Instructions

Surface Preparation

1- The surface must be level, dry, completely clean, and free from cracks and dust to ensure optimal adhesion.

2- In case of slight slopes or unevenness, the surface should be leveled before application.

Application Steps

1- Mix Component A (resin) with Component B (hardener) in a specified ratio.

2- A slow-speed mixer (300-600 rpm) is recommended to ensure even distribution of the hardener within the mixture.

3- Spread the mixture using a V-notch trowel at a thickness of 2 mm directly under each roll right after mixing to avoid exceeding the pot-life.

4- The rolls must be pressed with a heavy roller within one hour of adhesive application to ensure optimal adhesion.

5- Light pedestrian traffic is allowed after 6 hours; full curing occurs after two days.

Tool & Equipment Cleaning

Tools must be cleaned using polyurethane solvent immediately after use to prevent the adhesive from hardening.

Storage & Shelf Life

1- Keep in tightly sealed containers for up to 12 months.

2- Store in dry places at temperatures between 5°C and 30°C away from direct sunlight.

Safety & Environmental Instructions

1- Application must be done in well-ventilated areas while wearing protective gloves.

2- Avoid contact with skin or eyes, in case of contact, wash thoroughly with water and soap.

3- Do not dispose of the material in water or soil. Dispose of in accordance with local environmental regulations.

4- For Material Safety Data Sheets (MSDS), contact the company.